Breeze Connect SIP Trunks can be setup on supported phone systems and gateway products.


SIP registrar:    voice.breezeconnect.com.au

Port:                5060

Transport:        UDP


You should enable DNS SRV/NAPTR lookups when configuring your SIP device. If you do not enable this setting you will only register to the first SIP node.

This will allow your device to see the most up to date list of SIP nodes. At the time of writing there are 2 SIP nodes:

Primary: sip.dc1.breezeconnect.com.au

Secondary sip.dc2.breezeconnect.com.au


We recommend using the G711a codec for the best sound quality.
On slower connections the G729a codec can be used.


Legacy "Breeze 1.0" services


SIP registrar:    sip.breezeconnect.com.au

Port:                5060

Transport:        UDP


You should enable DNS SRV/NAPTR lookups when configuring your SIP device. If you do not enable this setting you will only register to the first SIP node.

This will allow your device to see the most up to date list of SIP nodes. At the time of writing there are 2 SIP nodes:
Primary:        sipsrv1.breezeconnect.com.au

Secondary:   sipsrv2.breezeconnect.com.au


We recommend using the G711a codec for the best sound quality.
On slower connections the G729a codec can be used.